German - Germany

Variable Speed Drives Provide Cool Energy Savings at Henry Denny

Variable Speed Drives Provide Cool Energy Savings at Henry Denny

Control Techniques variable speed drives provide cool energy savings solutions

The Challenge

The plant has a large ammonia compressor to keep the rooms within carefully controlled temperatures. The compressor controller calls for more or less compression of ammonia coolant with immediate response from the drive. Previously the compressor was soft-started and run up to full speed on demand but when the company had to replace the soft starter, Ciaran McSherry, Henry Denny’s Electrical Engineer, recommended a change to a variable speed AC drive.

The solution

A large free-standing variable speed AC drive is set up in the chiller to give a feedback pulse for each kWh to the factory management system so that controllers can monitor energy usage very precisely. “We used to have a slow reaction time to temperature swings with the soft starter but now it is easy to hold the temperature pretty well bang on our target of minus 10°C, as well as cutting our energy bill by around 50%,” said Mr McSherry. “The project has been enormously successful and has really reinforced the energy-saving benefits that can come from variable speed drives.”

Impressed? Contact us for your automation needs 
The Benefits

The drive has improved temperature control and the benefits proved to be better than estimated with savings of approximately 7,500 kWh (equivalent to around £23,400 of the company’s annual electricity bill) – a reduction of approximately 50% of the plant’s total power usage.

Download the Case Study
Highlights
This website uses cookies to ensure you get the best experience on our website. Learn More