The Elevator Drive

• Simple and intuitive parameter adjustment via a bright back-lit LCD keypad
• Set-up in familiar elevator language and units
• Easy to use menu structure for quick and simple access to key adjustments
• Top level menu; all your frequently needed functions in one location
• Stationary autotune provides encoder phasing test without the need to de-rope the system or to open the motor brakes

• Direct-to-floor positioning
• Peak curve operation
• High resolution multi-step S-ramp for start, run, slowdown and stopping
• Ultra-fast current loop for vibration free motor control
• Advanced brake control management, no rollback on starting without the need of load sensor 

• EN81-20 / EN81-50 TÜV certified STO enable input removes the need for both output motor contactors
• High switching frequencies selectable up to 16 kHz
• Variable speed cooling fan

• Standby sleep/wake mode, powers down unused circuitry during prolonged periods of standby
• Easy connection to a range of regenerative modules

• Modbus RTU communications
• Parallel I/O interface
• +/- 10V analog reference control
• Direct RS485 comms control
• DCP3 and DCP4 communication support with optional System Integration module
• CANopen communication support with optional System Integration module
• Tile mount for low profile shaft mounting
• 24 Vdc backup
• Simple UPS connection with load direction signal
• Dynamic braking transistor fitted to all drives as standard

• Active thermal management for tripless operation under extreme conditions
• Advanced power circuit design using latest IGBT technology
• Conformal coating for use in harsh environments
• Phase loss detection on both input and output

• User configurable, for example speed reference, speed feedback, current and I/O sequence can all be recorded for every car journey
• Can be stored in the event of system fault
• Available for offline viewing to aid system diagnostics

Standard features

• RS485 communications port MODBUS RTU with integrated command word and built in watchdog

• 1 x Safe Torque Off (STO) terminal
• SIL3/PLe compliant

• Dedicated elevator keypad supplied as standard, providing:
  • Intuitive elevator application menu structure
  • Easy click-in keypad connection
  • Easy-to-use menu and parameter structure
  • Local and remote mounting
  • Real-time clock

• 3

• PC tools
• Smartcard
• SD card

Remote Keypad RTC Remote mountable keypad, allowing flexible mounting on the outside of a panel (meets IP54/NEMA 12). The keypad offers a four line plain text, multi-language LCD display for rapid set-up and helpful diagnostics. A battery operated real-time clock allows accurate time stamping of events, aiding diagnostics.

System Integration Modules - Communications

System Integration Modules - Feedback

 System Integration Modules - Applications

	SI-Applications Plus SI-Applications Plus modules allow SyPTPro application programs to be recompiled and executed to enable rapid and simple upgrade for existing elevator drive users
	MCi200 Second processor, providing advanced customization using industry standard IEC61131-3 programming languages
	MCi210 Extended advanced machine control, provides MCi200 functionality with additional ports and simultaneous connectivity to 2 separate Ethernet networks

 System Integration Modules - Additional I/O

SI-I/O Extended I/O interface module to increase the number of I/O points on a drive. Provides additional: 4 x Digital I/O, 3 x Analog inputs (default)/Digital inputs, 1 x Analog output (default)/Digital input, 2 x Relays

 Drive interface units - Back-up

	Smartcard Smartcard memory device to back-up and copy parameter sets and basic programs
	SD Card Adaptor Allows an SD card to be inserted into the Smartcard slot, for parameter backup cloning and application programs

  Drive interface units - Communications

We make it quick and easy