‘Ragging’ – the fouling of pump impellers – is a costly, ongoing problem faced by water companies the world over. As well as it being a dirty unpleasant task, the cost of clearing a blocked pump in a dirty water facility is expensive, involving a maintenance team and sometimes a crane. Downtime may extend to several days during which time back-up systems are under additional pressure. A total system failure can result in effluent leakage with implications for the environment, human health, cleanup costs and breaches of legislation.
Key to this unique solution is the detection of ragging at a very early stage and Unidrives were chosen for two main reasons: the drives measure true load torque in real time and have a powerful internal PLC, which has a reaction time measured in microseconds. Two 160 kW Unidrives were installed, both fitted with SM Application modules and communicated with each other via Control Techniques’ highspeed network CT-Net (which gives 100% redundancy in the event of a blockage or failure).
Each drive controls a single pump and these are configured in duty and standby mode. When the PLC recognises a change in the pump preset torque profile indicative of ‘ragging’ (it is sensitive to 1-2% changes), it initiates a set of procedures to clear the impeller. If they fail to rectify the problem an alarm is initiated. The engineer can remotely access the drive by Ethernet using Control Techniques software to assess the situation and perform manual operations.Impressed? Contact us for your automation needs
The installation at Seaton Sluice had no blockages in the first six months of monitoring, where previously there were regular, often weekly, blockages. "This is an excellent example of modern technology providing a cost-effective solution to a long-standing water industry problem, giving significant improvements in performance, as well as cutting downtime and maintenance call-outs.", says Andy Laundon, M&E General Manager, Byzak Limited.Download the Case Study