1.1 kW – 2.8 MW (1.5 - 4,200 hp)
200 V / 400 V / 575 V / 690 V
Powerdrive F300 AC variable speed drive is designed to control all AC induction motors and sensorless permanent magnet motors on the market. Even greater performance and energy efficiency savings can be achieved with our Dyneo® package which includes the Powerdrive F300 and the LSRPM permanent magnet motor.
Powerdrive F300’s modular offering gives you never before seen flexibility in building compact, reliable high-power solutions. Paralleled together, Powerdrive F300 can control asynchronous and synchronous motors up to 2.8 MW (4,200 hp). At the top of the modular drives range, the Frame 12 is a 500 kW (700 hp) single module that delivers unmatched power density, while keeping both footprint and system costs to a minimum. The modules can be paralleled together into a wide range of flexible solutions to solve all system needs, including Active Front End and multi-pulse rectifier configurations.
Designing and building a high power drive cubicle takes immense engineering knowhow. Most people don’t have that expertise in-house, but we do. And we’ve put it all into our DFS freestanding drives. The cubicle system is designed to make the most of our high power modular drives, benefiting the applications that need them the most. The results are maximum energy efficiency in an ingress protected package. Our cubicle drives come pre-assembled, easy to set up, with all necessary system components included. Furthermore, we can ship your Freestanding drive to you with a very short lead time, saving weeks on typical industry standards.
Flexible functionality, minimising your resources
Ease and speed of design, build and commissioning
Flexible I/O range
Safe Torque Off
Harmonics and drive conformance
Key data
Standard features
Intelligence:
Onboard PLC
Onboard comms:
RS485
Safety:
1 x Safe Torque Off (STO) terminal
SIL3/PLe compliant
Keypad:
Options slots:
Parameter cloning via:
VOLTAGE RATINGS
|
200 V (200 V - 240 V ± 10%) |
400 V (380 V - 480 V ± 10%) |
575 V (500 V - 575 V ± 10%) |
690 V (500 V - 690 V ± 10%) |
CONTROL MODE |
Open loop vector or V/Hz induction motor control |
Open loop Rotor Flux Control for induction motors (RFC-A) |
Open loop permanent magnet motor control (RFC-S) |
Closed loop Rotor Flux Control for induction motors (RFC-A) |
Closed loop permanent magnet motor control (RFC-S) |
Active Front End (AFE) power quality convertor |
SINGLE DRIVES:
FRAME SIZE | DIMENSIONS (H X W X D) | WEIGHT KG(LB) | ||
---|---|---|---|---|
mm | in | kg | lb | |
3 | 365 x 83 x 200 | 14.4 x 3.3 x 7.9 | 4.5 Max | 9.9 Max |
4 |
365 x 124 x 200
|
14.4 x 4.9 x 7.9 | 6.5 | 14.3 |
5 | 365 x 143 x 200 | 14.4 x 5.6 x 7.6 | 7.4 | 16.3 |
6 | 365 x 210 x 227 | 14.4 x 8.3 x 8.9 | 14 | 30.9 |
7 | 508 x 270 x 280 | 20 x 10.6 x 11.0 | 28 | 61.7 |
8 | 753 x 310 x 290 | 29.7 x 12.2 x 11.4 | 52 | 114.6 |
9A | 1049 x 310 x 290 | 41.3 x 12.2 x 11.4 | 66.5 | 146.6 |
9E | 9T † | 1010 x 310 x 290 | 41.3 x 12.2 x 11.4 | 46 | 101.4 |
10E | 10T † | 1010 x 310 x 290 | 41.3 x 12.2 x 11.4 | 46 | 101.4 |
11E| 11T† | 1190 x 310 x 312 | 46.9 x 12.2 x 12.3 | 63 | 139.8 |
MODULAR DRIVES:
FRAME SIZE | DIMENSIONS (H X W X D) | |
---|---|---|
mm | in | |
INVERTER | ||
9D | 773 x 310 x 290 | 30.4 x 12.2 x 11.4 |
10D | 773 x 310 x 290 | 30.4 x 12.2 x 11.4 |
11D | 863 x 310 x 312 | 34 x 12.2 x 12.3 |
RECTIFIER | ||
10A |
6 pulse
355 x 310 x 290
|
6 pulse
15.8 x 12.2 x 11.4
|
11A | 11T |
6 pulse
415x 310 x 290
12 pulse
415 x 310 x 290
|
6 pulse
16.3x 12.2 x 11.4
12 pulse
16.3 x 12.2 x 11.4
|
Dimensions include mounting brackets.
† Internal line choke not included
Keypads
|
KI-HOA Keypad RTC The KI-HOA Keypad RTC provides Hand-Off-Auto control. The display presents up to four lines of real text with multi-language translation, enhancing clarity and increasing ease of use. A battery operated realtime clock allows accurate time stamping of diagnostics and aids quick fault resolution. |
|
Remote keypad All the features of the CI-Keypad LCD, but remote mountable. This allows flexible mounting on the outside of a panel and meets IP66 (NEMA 4). |
System Integration Modules - Communications
|
SI-PROFIBUS PROFIBUS-DP (Decentralized Peripheral) interface module enables follower connectivity. It is possible to use more than one SI-PROFIBUS or a combination of SI-PROFIBUS and other option modules to add additional functionality such as extended I/O, gateway functionality, or additional PLC features. |
|
SI-DeviceNet DeviceNet networking system interface module enables follower connectivity. It is possible to use more than one SI-DeviceNet or a combination of SI-DeviceNet and other option modules to provide additional functionality such as extended I/O, gateway functionality, or additional PLC features. |
|
SI-CANopen CANopen interface module supporting various profiles, including several drive profiles. |
|
SI-Ethernet External Ethernet module that supports PROFINET RT*, EtherNet/IP and Modbus TCP/IP and has an integrated web server that can generate emails. The module can be used to provide high speed drive access, global connectivity and integration with IT network technologies, such as wireless networking. |
|
SI-PROFINET RT PROFINET RT interface modulePROFINET RT interface module provides fast, high-precision communications for maximum plant productivity. Dual port cable connection ensures rapid and easy installation. PROFINET is an Ethernet based industrial network protocol adapting Ethernet hardware to the real time needs of industrial automation. |
System Integration Modules - Additional I/O
|
SI-I/O |
Drive interface units - Back-up
|
Smartcard The optional Smartcard memory device can be used to back-up parameter sets and basic PLC programs, as well as copying them from one drive to another. |
|
SD Card Adaptor Conversion device that allows an SD card to be inserted into the Smartcard slot, for parameter cloning and application programs. |
Drive interface units - Communications
|
KI-485 Adaptor This allows the drive to communicate via RS485. This is commonly used for programming if the drive has no keypad. |
|
CT USB Comms Cable The USB Comms Cable provides PC connectivity to the drive, enabling drive configuration with the Connect PC Tool. Use of the Connect PC Tool is recommended for setup of LSRPM motors. Drives with Ethernet support PC connectivity via a standard Ethernet cable. |
Connect - Intuitive Commissioning Software |
|
Connect is our latest drive configuration tool for commissioning, optimising and monitoring drive/system performance.
|
|
Machine Control Studio - Programming Tool |
|
Control Techniques' Machine Control Studio provides a flexible and intuitive environment for programming new automation and motion control features.
|
|
Diagnostics Tool |
|
Diagnostic Tool is a fast and simple tool, which allows users of Control Techniques' drives to quickly solve any error codes that the drive may show.
|
|