Digitax HD M751 Base

Maximum performance

• 300% peak current performance pulse-duty overload
• Optimised control loops for high dynamic performance
• 62.5 μs current loop
• 250 μs position and speed loop
• Up to 16 kHz switching frequency
• Supports a wide range of feedback technologies including Quadrature, SinCos (including absolute), SSI, BiSS, EnDat (up to 4 Mb with EnDat 2.2) and resolvers
• Maximum performance package with high torque density, low inertia Unimotor hd servo motors
• Analogue and pulse/direction control for centralised motion
• Advanced 1.5 axes Motion Controller, key features include:
  • Real-time tasks
  • 250 μs cycle time
  • Motion profile generator
  • Electronic gearbox
  • Interpolated CAM
  • 2Homing functions
  • High speed position freeze

Minimum size

• 40 mm drive width and option bracket adds 22 mm, providing a highly competitive maximum drive width of 62 mm
• Reduce cabinet height by directly stacking rows of drives. Patented Ultraflow™ technology expels heat directly outside of the cabinet through the rear of the drive (drive heat dissipation can also be achieved via vents on the top of the drive, as standard).
• Fits into cabinets just 200 mm deep

Easy installation and setup

• DIN rail alignment
• Kits for easy multi-axis installation
• Single motor cable and electronic motor name plate for fast set up
• Seamless motor-drive pairing with Unimotor hd servo motors
• Easy access pluggable connectors
• Rapid commissioning with the Connect PC tool and SD cards
• Machine Control Studio provides a flexible and intuitive environment for programming automation and motion control features
  • Programmable with IEC61131 standard languages

Flexibility

• Two option slots for functionality extension and customisation (see available option modules)
• Built-in RS485 communications

Safety on-board

• Improved productivity with machine safety
  - Integrated dual Safe Torque Off
  - Meets SIL3 (Safety Integrity Level 3) and PLe (Performance Level e)

Functional Safety

All Digitax HD drives have integrated dual Safe Torque Off (STO) inputs, certified to SIL3 / PLe, providing an elegant and reliable safety solution. 
The addition of an MiS250 safety option extends the built-in STO with the ability to safely monitor and/or restrict the scope of motion. 
Safety functions include: STO, SBC, SOS, SS1, SS2, SLS, SSM, SLA, SDI, SLP & SES
For maximum flexibility in the safety system architecture, the modules support both wired and network safety connections: CIP-Safety on EtherNet/IP and Safety over EtherCAT (FSoE).
To find out more, visit our Functional Safety page.

Keypads

	Remote Keypad RTC The keypad is remote mountable, allowing flexible mounting on the outside of a panel (meets IP54/NEMA 12). Three line plain text, multi-language LCD keypad for rapid set-up and helpful diagnostics. Battery operated real-time clock allows accurate time stamping of events, aiding diagnostics. ORDER CODE: 82400000019600
	KI-Compact Display The display (fitted on M753, optional on M751) ensures access to drive diagnostics even in the absence of network connectivity. Includes 2 rotary switches for hardware setting of the node address for faster commissioning of the motion network.    ORDER CODE: 82700000020400
	KI-Compact 485 Adaptor This allows the drive to communicate via RS485. This is commonly used for programming if a keypad or KI-Compact Display is not ordered with the drive.   ORDER CODE: 82700000020300

Integration Products

Remote I/O Industrial control applications typically use a PLC system to manage the process; using I/O to provide an interface to switches, relays and sensors attached to the machine. RTMoE & MODBUS TCP Network Adapter ORDER CODE - IO210-BC EtherCAT Network Adapter ORDER CODE - IO211-BC

System Integration Modules - Feedback

	SI-Encoder Quadrature encoder input interface module.   ORDER CODE: 82400000018100
	SI-Universal Encoder Encoder input and output interface supporting Quadrature, SinCos, EnDat and SSI encoders.   ORDER CODE: 82400000018300

System Integration Modules - Communications

	SI-PROFIBUS SI-PROFIBUS interface module enables follower connectivity. It is possible to use multiple SI-PROFIBUS modules or a combination of SI-PROFIBUS and other option module types to add additional functionality such as extended I/O, gateway functionality or additional PLC features. ORDER CODE: 82400000017500
	SI-POWERLINK SI-POWERLINK serves applications ranging from simple open-loop systems through to those demanding precise motion control. ORDER CODE: 82400000021600
	SI-DeviceNet SI-DeviceNet enables follower connectivity. It is possible to use multiple SI-DeviceNet modules to provide additional functionality. ORDER CODE: 82400000017700
	SI-CANopen SI-CANopen interface module supports various profiles, offering optimum flexibility. ORDER CODE: 82400000017600
	SI-Ethernet SI-Ethernet can be used to provide high speed drive access, global connectivity and integration with IT network technologies.  ORDER CODE: 82400000017900
	SI-EtherCAT SI-EtherCAT allows the drive to connect and interface with EtherCAT networks. ORDER CODE: 82400000018000
	SI-PROFINET SI-PROFINET allows the drive to communicate and interface with PROFINET PLCs and networks. ORDER CODE: 82500000018200
	SI-INTERBUS 500kBd SI-INTERBUS 2MBb                SI-INTERBUS for easy integration to the Interbus fieldbus in applications that use or drives ORDER CODE: 82400000021220 ORDER CODE: 82400000021230

System Integration Modules - Additional I/O

SI-I/O Extended I/O interface module to increase the number of I/O points on a drive. Provides additional: 4 x Digital I/O, 3 x Analogue inputs (default)/Digital inputs, 1 x Analogue output (default)/Digital input, 2 x Relays. ORDER CODE: 82400000017800

SI-I/O 24 Plus The SI-I/O 24 Plus option module provides a plug in high density I/O expansion solution for Unidrive and Digitax HD. Features include: 16 x Digital Inputs (8 high speed), 8 x Digital Outputs and an Incremental Encoder Input (AB Servo). A High Density DIN rail mounted screw terminal breakout board and cable is available to provide easy connection to the module.  ORDER CODE: 82400000022000

System Integration Modules - Applications

	SI-Apps Compact Compatible module allows SyPTPro application programs to be re-complied for HD. ORDER CODE: 82400000020700
	MCi200 Second processor, providing advanced customization using industry standard IEC61131-3 programming languages. ORDER CODE: 82400000017000
	MCi210 Extended advanced machine control, provides MCi200 functionality with additional ports and simultaneous connectivity to 2 separate Ethernet networks. ORDER CODE: 82400000016700
	PTi210 PTi210 allows setup of complex servo motion control applications within minutes ORDER CODE: 82400000021400

System Integration Modules - Safety

MiS250 MiS250 safety option extends the built-in STO with motion safety capability and enables decentralised flexibility with the option of safety over ethernet connectivity. To find out more, visit our Functional Safety page. ORDER CODE: 82400000021100

Optional Accessories

	USB to EIA485 Communications Converter Cable The USB comms cable allows the drive to connect to a PC for use with our PC tools*. ORDER CODE: 4500-0096
	Digitax M75C CapShare Capacitor module (200 V and 400 V) with thermal protection to increase maximum energy storage capacity, and optimise energy efficient usage.

* Also requires KI-Compact-485 adaptor

We make it quick and easy

Connect - Intuitive Commissioning Software

Connect is our latest drive configuration tool for commissioning, optimising and monitoring drive/system performance.   Download

Machine Control Studio - Programming Tool

Control Techniques' Machine Control Studio provides a flexible and intuitive environment for programming new automation and motion control features.   Download

Diagnostics Tool

Diagnostic Tool is a fast and simple tool, which allows users of Control Techniques' drives to quickly solve any error codes that the drive may show.   Download