Unidrive HS30

Flexible integration with safety and communications

Unidrive HS30

0 – 3,000 Hz Open Loop

0.25 kW – 7.5 kW (0.33 hp – 10 hp)

200 V / 400 V

Unidrive HS30 is designed for applications that require cost effective integration into safety systems and incorporates dual Safe Torque Off and advanced Rotor Flux Control (RFC-A) of open loop induction motors.

  • Features

    Conform to safety standards, maximize uptime and reduce costs by integrating directly with safety systems

    • HS30 has integrated dual STO inputs for SIL3, PLe conformity, eliminating the need for external safety components

    Improve throughput with advanced open-loop motor control algorithms

    • Rotor Flux Control (RFC-A) gives maximum stability and control of induction motors at all powers.
    • 180% motor overload suitable for heavy industrial machinery applications

    Flexible system integration with SI communications options

    • HS30's SI interface enables integration with a wide range of available industry standard fieldbuses and I/O

    Install and configure quickly and easily

    • Simple fixed LED keypad
    • Useful parameter guide located on the front of the drive
    • Use Unidrive M Connect or an SD card with the AI-Backup adaptor to clone and transfer parameter sets
    • DIN rail mounting is supported below 1.5 kW
  • Specifications

    Key data

    • Heavy Duty rating: 0.25 - 132 kW (0.33 - 179 hp)
    • Supply phases:
      • Size 1 to 4: 110 V drives – 1 phase, 230 and 400 V drives - 1 or 3 phase
      • Size 5 upwards: 3 phase

    Standard features

    Machine safety:

    • 2 x Safe Torque Off terminals

    Keypad:

    • Fixed LED

    Option slots:

    • 1 (Size 2 and above)

    Parameter cloning via:

    • PC tools
    • SD card with AI-Smart Back Up
    • AI-Smart Adaptor

     

    VOLTAGE RATINGS

    100 V (100 V - 120 V ± 10%)

    200 V (200 V - 240 V ± 10%)

    400 V (380 V - 480 V ± 10%)

    575 V (500 V - 575 V ± 10%)

    690 V (500 V - 690 V ± 10%)

     

     

    CONTROL MODE

    Open loop vector or V/Hz induction motor control

    Open loop Rotor Flux Control for induction motors (RFC-A)

    Open loop permanent magnet motor control (RFC-S)

     

    Closed loop Rotor Flux Control for induction motors (RFC-A)

     

    Closed loop permanent magnet motor control (RFC-S)

     

    Active Front End (AFE) power quality convertor

     

     

     

    FRAME SIZE

    DIMENSIONS (H X W X D)

    WEIGHT

     

    mm

    in

    kg

    lb

    1

    160 x 75 x 130
    DIN rail mounting*
    137 x 75 x 130
    6.3 x 3.0 x 5.1
    DIN rail mounting*
    5.4 x 3.0 x 5.1
    0.75 1.65

    2

    205 x 75 x 150
    DIN rail mounting*
    180 x 75 x 150
    8.1 x 3.0 x 5.9
    DIN rail mounting*
    7.1 x 3.0 x 5.9
    1.0 2.2

    3

    226 x 90 x 160 8.9 x 3.5 x 6.3 1.5 3.3

    4

    277 x 115 x 175 10.9 x 4.5 x 6.9 3.13 6.9

     

    *Additional fixings required to maximize security
  • Options

    Keypad

     

    Remote keypad
    All the features of the CI-Keypad LCD, but remote mountable. This allows flexible mounting on the outside of a panel and meets IP66 (NEMA 4)

    System Integration Modules - Communications

     

    SI-PROFIBUS
    PROFIBUS interface module

     

    SI-DeviceNet
    DeviceNet interface module

     

    SI-CANopen
    CANopen interface module.

     

    SI-Ethernet
    External Ethernet module that supports EtherNet/IP and Modbus TCP/IP

     

    SI-EtherCAT
    EtherCAT interface module

      SI-PROFINET RT
    PROFINET interface module

    System Integration Modules - Additional I/O

     

    SI-I/O
    Extended I/O interface module to increase the number of I/O points on a drive

    Drive interface units - Back-up

    AI-Back-up Adaptor
    Port adaptor for SD card parameter cloning, and an input for 24 V back-up
    AI-Smart Adaptor
    Has a built-in memory for parameter cloning, and an input for 24 V back-up

    Drive interface units - Communications

     

    AI-485 Adaptor 24 V
    Port adaptor that allows the drive to communicate via RS485. Includes an input for 24V
     
     
    CT USB Comms Cable
    The USB Comms cable allows the drive to connect to a PC for use with Unidrive M's PC tools*

     

    * Also requires an adaptor.

  • Software

    Commissioning and monitoring software

    Unidrive M Connect - Commissioning tool
    Based on Control Techniques’ 25 years' experience, Unidrive M Connect is our latest drive configuration tool for commissioning, optimizing and monitoring drive/system performance

     Automation and motion programming software

    Machine Control Studio - Programming tool
    Control Techniques' Machine Control Studio provides a flexible and intuitive environment for programming Unidrive M’s new automation and motion control features.
  • Downloads

This website uses cookies to ensure you get the best experience on our website. Learn More