Unidrive HS30
0 – 3,000 Hz Open-Loop
0.33 hp – 10 hp (0.25 kW – 7.5 kW) Heavy Duty
200 V | 400 V
Unidrive HS30 is designed for applications that require cost effective integration into safety systems and incorporates dual Safe Torque Off and advanced Rotor Flux Control (RFC-A) of open-loop induction motors.
-
Features
Conform to safety standards, maximize uptime and reduce costs by integrating directly with safety systems
- HS30 has integrated dual STO inputs for SIL3, PLe conformity, eliminating the need for external safety components
Improve throughput with advanced open-loop motor control algorithms
- Rotor Flux Control (RFC-A) gives maximum stability and control of induction motors at all powers.
- 180% motor overload suitable for heavy industrial machinery applications
Flexible system integration with SI communications options
- HS30's SI interface enables integration with a wide range of available industry standard fieldbuses and I/O
Install and configure quickly and easily
- Simple fixed LED keypad
- Useful parameter guide located on the front of the drive
- Use Unidrive M Connect or an SD card with the AI-Backup Adaptor to clone and transfer parameter sets
- DIN rail mounting is supported below 2 hp (1.5 kW)
-
Specifications
Key data
- Heavy Duty rating: 0.25 - 7.5 kW (0.33 - 10 hp)
- Supply phases:
- Size 1 to 4: 110 V drives – 1 phase, 230 and 400 V drives - 1 or 3 phase
Standard features
Machine safety:
- 2 x Safe Torque Off terminals
Keypad:
- Fixed LED
Option slots:
- 1 (Size 2 and above)
Parameter cloning via:
- PC tools
- SD card with AI-Backup Adaptor
- AI-Smart Adaptor
VOLTAGE RATINGS 100 V (100 V - 120 V ± 10%) 200 V (200 V - 240 V ± 10%) ✓ 400 V (380 V - 480 V ± 10%) ✓ 575 V (500 V - 575 V ± 10%) 690 V (500 V - 690 V ± 10%)
CONTROL MODE
Open-loop vector or V/Hz induction motor control ✓
Open-loop Rotor Flux Control for induction motors (RFC-A) ✓
Open-loop permanent magnet motor control (RFC-S) Closed-loop Rotor Flux Control for induction motors (RFC-A) Closed-loop permanent magnet motor control (RFC-S) Active Front End (AFE) power quality convertor
FRAME SIZE DIMENSIONS (H X W x W)
WEIGHT (kg / lb)
mm in Kg lb 1
160 x 75 x 130
DIN rail mounting*
137 x 75 x 130
6.3 x 3.0 x 5.1
DIN rail mounting*
5.4 x 3.0 x 5.1
0.75 1.65 2
205 x 75 x 150
DIN rail mounting*
180 x 75 x 150
8.1 x 3.0 x 5.9
DIN rail mounting*
7.1 x 3.0 x 5.9
1.0 2.2 3
226 x 90 x 160 8.9 x 3.5 x 6.3 1.5 3.3 4
277 x 115 x 175 10.9 x 4.5 x 6.9 3.13 6.9
*Additional fixings required to maximize security -
Options
Keypad
Remote keypad
All the features of the CI-Keypad LCD, but remote mountable. This allows flexible mounting on the outside of a panel and meets IP66 (NEMA 4)
System Integration Modules - Communications
SI-PROFIBUS
PROFIBUS interface module
SI-DeviceNet
DeviceNet interface module
SI-CANopen
CANopen interface module supporting various profiles, including several drive profiles
SI-Ethernet
Ethernet module that supports EtherNet/IP and Modbus TCP/IP
SI-PROFINET V2
PROFINET RT interface module
SI-EtherCAT
EtherCAT interface module
System Integration Modules - Additional I/O
SI-I/O
Extended I/O interface module to increase the number of I/O points on a drive. Provides additional: 4 x Digital I/O, 3 x Analog inputs (default)/Digital inputs, 1 x Analog output (default)/Digital input, 2 x Relays
Drive Interface Units - Backup
AI-Backup Adaptor
Port adaptor for SD card parameter cloning, and an input for 24 V backup
AI-Smart Adaptor
Built-in memory for parameter cloning, and an input for 24 V backup.
Drive interface units - Communications
AI-485 Adaptor
Port adaptor that allows the drive to communicate via RS485
CT-USB-CABLE
This USB Communications cable allows the drive to connect to a computer for use with Control Techniques’ PC tools.
Operator Interfaces and HMI
The powerful CTVue HMI (Human Machine Interface) line and integrated drivers for Control Techniques drives make it easy to integrate HMI with CT drives
Requires a drive RS485 port.*
-
Software
Commissioning and monitoring software
Unidrive M Connect - Commissioning tool
Based on Control Techniques’ 25 years experience, Unidrive M Connect is our latest drive configuration tool for commissioning, optimizing and monitoring drive/system performance
HMI software
Control Techniques CTVue human interface software tool enables the operator to easily configure drive-related control variables.
-
Downloads
