Freedom Cantilever Holeless

(Click images to enlarge)

(Click image to enlarge)

This design utilizes a hydraulic single stage jack and is installed directly on the pit floor. The platform is supported by a cantilevered car frame with the jack and rails located on one side of the hoistway.

Advantages:

Jack hole is not required. Eliminating the cost of drilling and the risk of ground contamination from oil leak.
Accommodates front, rear and side opening configurations.
Allows for glass walls on sides where equipment is not located.
Rail bracket attachment only required on one wall of the hoistway.

Disadvantages:

May require a larger hoistway width to accommodate rail and jack equipment being mounted on only one side of the car or at the rear.
Additional rail force considerations are necessary to accommodate rail brackets being mounted only on one wall.
Limited to approximately 16’-0” of travel.
Limited to 3000-lb. capacity rating.

Click below to see Sizing Details and Downloads.
AutoCad drawings (.dwg files) are in a zipped folder and will need to be unzipped once downloaded.

Passenger Cantilever Holeless

Type	Capacity (lbs)	Hoistway - Width x Depth	Platform - Width x Depth	Inside Cab - Width x Depth	Front/ Side	Door Type	Door Width	PDF LH \| RH		AutoCAD LH \| RH
Passenger	2000	7'-4" x 6'-10"	6'0" x 5'-1"	5'8" x 4'-3"	Front	Single Speed	3'-0"	.pdf		.dwg
	2000	8'-0" x 6'-10"	6'-8" x 5'-1"	5'-8 1/2" x 4'-3"	Front/ Side	1 & 2 Speed	3'-0"	.pdf	.pdf	.dwg	.dwg
	2500	8'-4" x 6'-10"	7'-0" x 5'1"	6'8" x 4'-3"	Front	Single Speed	3'-6"	.pdf		.dwg
	2500	9'-0" x 6'-10"	7'-8" x 5'-1"	6'-8 1/2" x 4'-3"	Front/ Side	1 & 2 Speed	3'-6"	.pdf	.pdf	.dwg	.dwg
	3000	8'-4" x 7'3"	7'-0" x 5'-6"	6'8" x 4'-8"	Front	Single Speed	3'-6"	.pdf		.dwg
	3000	9'-0" x 7'-3"	7'-8" x 5'-6"	6'-8 1/2" x 4'-8"	Front/ Side	1 & 2 Speed	3'-6"	.pdf	.pdf	.dwg	.dwg

Additional Specs and Notes
Additional Specs*
- Pit Depth = 4′-0″
- Standard Cab Height = 8′-0″
- Speed available to 150 FPM
- Consult factory for overhead requirements
Notes for Cantilever Holeless*
- 2000-lb. car complies with NEII recommendations for car to accommodate wheelchair.
- 2500-lb. and larger cars comply with NEII recommendations for car to accommodate 24″ x 76″ stretcher when equipped with single slide doors.
- 3000-lb. cars comply with NEII recommendations for car to accommodate 24″ x 84″ stretcher as noted when door arrangement is as shown.

Hydraulic Elevator Resources & Downloads

Request for Quote & Survey Forms

Installation Instructions

Engineering Data

Specification Sheet

Cab Survey Sheet

Looking for replacement parts?

(Click Here!)

Freedom Cantilever Holeless

Hydraulic Elevator Resources & Downloads

Canton Elevator

Motion Control Engineering

Imperial Electric

About Us