STANDARD FEATURES, OPTIONAL EQUIPMENT AND CUSTOM SOLUTIONS
Whether your project requires a hole to be drilled or not Canton Elevator has a hydraulic jack solution to suit your needs. All our designs are simple but effective and user-friendly. We have the ability to manufacture residential assemblies to freight car applications. If you require a custom application don’t hesitate to ask we might surprise you and be able to accomplish the task!
Custom Solutions
- Cylinder Only Manufacturing
- Re-use Existing Cylinder Head with new Cylinder Material
- Two-Stage Telescopic
- Double Wall Cylinders
- Double Bearing Cylinders
(Click below to see sizing details and downloads)
-
Standard Features
Piston Standard Features
- Material: DOM 1026 Tube (max length 22′)
- Finish: 16 RA with a factory applied corrosive preventive coating
- Diameter Variation: +/- .010”
- Joint Type: Internal Threaded sanded and polished with match marks
- Upper End: Inground & Roped include a plate with welded stud. Dual Holeless include a drilled and tapped plate.
- Lower End: Welded Bulk Plate and Stop Ring (Roped Stop ring is 360° all Inground and Dual Holeless 180°)
Cylinder Standard Features- Material: A53 Grade B Pipe (Max length 40′)
- Finish: Thoroughly cleaned, inspected and tested, then painted
- Joint Type: External Acme Threaded
- Upper End: Steel Flange Welded to receive Bolt-On Head and One-Piece Packing and Wiper Rings. Bleeder screws included for purging air.
- Bottom: Inground and Partial Inground units equipped with welded bulk plate and seamless dish cap. Holeless assemblies welded directly to mounting plate. Roped units fitted with a welded steel plate with oil inlet pipe nipple.
- Pit Supports: Inground units equipped with One-Piece Buffer/Pit Support Plate with Interval Leveling/Aligning Bolts. Dual Holeless and Cantilever Holeless fitted with Base Plate and Stabilizer Bracket
-
Single Stage Jack Assemblies Chart
Single Stage Jack Assemblies
Piston
OD
Cylinder OD
Std PVC Monitored PVC Single PC
CylMulti PC
CylS40
PVCS80
PVC3" 5"
8"
8"
N/A
N/A
3 1/2" 5" 8" 4" 6"
8" 10"
10"
10"
4 1/2" 6" 8" 5" 8" 8" 5 1/2" 8" 10" 12" 12" 12" 6" 8" 10" 6 1/2" 10" 14" 14" 14" 16" 7" 10" 14" 7 1/2" 10" 14" 8 " 10" 14" 8 1/2" 10" 14" 9" 12" 16" 16" 16" 18" 9 1/2" 10" 14" 18" 18" 18" 20" 10 1/2" -
Jack Head Diagrams
Single Stage Assembly Jack Head - 500 PSI
Single Stage Cantilever Assembly Head - 700 PSI
Single Stage Dual Rope Assembly Head - 900 PSI
-
Optional Equipment
- Cylinder Protective Tape Coating
- Schedule 40 or 80 PVC
- Sealed/Monitored PVC
- Custom Pit Supports
- Life Jacket
