Freedom Dual Roped

(Click images to enlarge)

   
 

(Click image to enlarge)

The design utilizes wire ropes in conjunction with two hydraulic jacks to lift the elevator at a 1:2 ratio. For each foot the jack rises, the elevator rises two feet. Opening configuration available in walk-thru and/or staggered. Staggered doors are required to accommodate the ambulance size stretcher.

Advantages:

  • Jack hole is not required. This eliminates the cost of drilling and the risk of ground contamination from an oil leak
  • Offered in both low and high capacity elevators
  • Accommodates front and rear opening configurations
  • Available with higher travels up to approximately 90'-0"
  • Minimal pit and overhead requirements

Disadvantages:

  • May require a large hoistway width to accommodate jacks mounted on either side of the platform
  • Governor access door is required in the overhead unless a special governor is provided
  • Side opening are not an option
  • Material cost and installation time is typically higher when compared to an in-ground application
Click below to see Sizing Details and Downloads.
AutoCad drawings (.dwg files) are in a zipped folder and will need to be unzipped once downloaded. 


 

  • Passenger Dual Roped - Front Open Only
    Chart Abbreviations:

    Cap. = Capacity (lbs)
    Hoist. = Hoistway (Width x Depth)
    Plat. = Platform (Width x Depth)
    In Cab = Inside Cab (Width x Depth)
    .Dwg = AutoCAD 

    Type Cap. Hoist.
    Platf.

    In Cab

    Door
    Type
    Door
    Width
    Travel
    Max
    PDF .dwg
    Passenger 2000 7'-6" x
    5'-10"
    6'-0" x
    5'-1"
    5'-8" x
    4'-3"
    Single
    Speed
    3'-0" 45' .pdf .dwg
    2000 7'-8" x
    5'-10"
    6-0" x
    5'-1"
    5'-0" x
    4'-3"
    Single
    Speed
    3'-0" 70' .pdf .dwg
    2500 8'-6" x
    5'-10"
    7'-0" x
    5'-1"
    6'-8" x
    4'-3"
    Single
    Speed
    3'-6" 40' .pdf .dwg
    2500 8'-8" x
    5'-10"
    7'-0" x
    5'-1"
    6'-8" x
    4'-3"
    Single
    Speed
    3'-6" 65' .pdf .dwg
    3000 8'-8" x
    6'-3"
    7'-0" x
    5'-6"
    6'-8" x
    4'-8"
    Single
    Speed
    3'-6" 65' .pdf .dwg
    3500 8'-8" x
    6'-11"
    7'-0" x
    6'-2"
    6'-8" x
    5'-4"
    Single
    Speed
    3'-6" 60' .pdf .dwg
    4000 9'-8" x
    6' 11"
    8'-0" x
    6'-2"
    7'-8" x
    5'-4"
    Single
    Speed
    4'-0" 55' .pdf .dwg
    4000 10"-0" x
    6'-11"
    8-′0″ x
    6′-2″
    7′-8″ x
    5′-4″
    Single
    Speed
    4'-0" 85' .pdf .dwg
    Hospital 4000 8'-0" x
    9'-6"
    6'-0" x
    8'-8"
    5'-8" x
    7'-8 1/2"
    Two
    Speed
    4'-0" 90' .pdf .dwg
    4500 8'-0" x
    9'-11"
    6'-0" x
    9'-1"
    5'-8" x
    8'-1 1/2"
    Two
    Speed
    4'-0" 85' .pdf .dwg
    5000 8'-4" x
    10'-5"
    6'-0" x
    9'-7"
    5'-8" x
    8'-7 1/2"
    Two
    Speed
    4'-6" 85 .pdf .dwg


    AutoCad drawings (.dwg files) are in a zipped folder and will need to be unzipped once downloaded.
  • Passenger Dual Roped Front and Rear Open
    Type

    Capacity
    (lbs)

    Hoistway -
    Width x Depth
    Platform -
    Width x Depth

    Inside Cab -
    Width x Depth

    Door
    Type
    Door
    Width
    Travel
    Max
    PDF AutoCAD
    Passenger 2000 7'-6" x 6'-9 1/2" 6'-0" x 5'-9" 5'-8" x 4'-4 3/4" Single
    Speed
    3'-0" 45' .pdf .dwg
    2000 7'-8" x 6'-9 1/2" 6'-0" x 5'-9" 5'-8" x 4'-4 3/4" Single
    Speed
    3'-0" 70' .pdf .dwg
    2500 8'-6" x 6'-9 1/2" 7'-0" x 5'-9" 6'-8" x 4'-4 3/4" Single
    Speed
    3'-6" 40' .pdf .dwg
    2500 8'-8" x 6'-9 1/2" 7'-0" x 5'-9" 6'-8" x 4'-4 3/4" Single
    Speed
    3'-6" 65' .pdf .dwg
    3000 8'-8" x 7'-1 1/2" 7'-0" x 6'-1" 6'-8" x 4'-8 3/4" Single
    Speed
    3'-6" 65' .pdf .dwg
    3500 8'-8" x 7'-9 1/2" 7'-0" x 6'-9" 6'-8" x 5'-4 3/4" Single
    Speed
    3'-6" 60' .pdf .dwg
    3500
    Stag. Open
    8'-8" x 7'-9 1/2" 7'-0" x 6'-9" 6'-8" x 5'-4 3/4" Side
    Slide
    3'-6" 60' .pdf .dwg
    4000 9′-8″ x 7′-8 1/2″ 8′-0″ x 6′-8″ 7'-8" x 5'-4 3/4" Single
    Speed
    4'-0" 55' .pdf .dwg
    4000 10'-0" x 7'-8 1/2" 8′-0″ x 6′-8″ 7'-8" x 5'-4 3/4" Single
    Speed
    4'-0" 85' .pdf .dwg
    Hospital 4000 8'-0" x 10'-7 1/2" 6'-0" x 9'-4" 5'-8" x 7'-8 3/4" Two
    Speed
    4'-0" 90' .pdf .dwg
    4500 8'-0" x 11'-0 1/2" 6'-0" x 9'-9" 5'-8" x 8'-1 3/4" Two
    Speed
    4'-0" 85' .pdf .dwg
    5000 8'-4" x 11"-6 1/2" 6'-0" x 10'-3" 5'-8" x 8'-7 3/4" Two
    Speed
    4'-6" 85' .pdf .dwg

    AutoCad drawings (.dwg files) are in a zipped folder and will need to be unzipped once downloaded.
  • Additional Specs and Notes
    Additional Specs

    Pit Depth = 4′-0″
    Standard Cab Height = 8′-0″
    Speed available to 150 FPM
    Minimum Overhead ≤ 100 FPM = 12′-1″
    Minimum Overhead > 150 FPM = 12′-4″

    Notes for Dual Roped

    • Hoistway widths and depths can be reduced by 1″ if conditions require and hoistway plumbness is maintained.
    • All elevators shown here comply with NEII and ADA space requirements for wheel chair access.
    • 2000-lb. elevators must have single-slide doors to meet NEII and ADA requirements for wheelchair access.
    • 2500-lb. and larger cars comply with NEII recommendations for car to accommodate 24″ x 76″ stretcher when equipped with single slide doors.
    • 3500-lb. and larger cars comply with NEII recommendations for car to accommodate 24″ x 84″ stretcher when equipped with single slide doors.
This website uses cookies to ensure you get the best experience on our website. Learn More