Motion 4000 MRL - A tailored solution for MRL hoistways

The MCE Motion 4000 MRL™ traction elevator package is the ideal solution for machine-roomless installations. 4000 MRL provides service to 32 floors/64 openings, speeds to 500 feet per minute, and group control of up to 6 cars. And, the MRL package provides a standard wavelength/infrared video-assisted rescue system, remote governor overspeed switch set/reset, and remote brake picking capability. Motion 4000 MRL makes the jobs of installers, adjusters, and maintenance personnel as straightforward as possible, stressing minimal hardware requirements, “out-of-the-box” job readiness, and simple adjustment.

*500 fpm (2.5 m/s) is possible, consult MCE for more information

Installers

• Choose the landing system that suits the job. ELGO for fewer hardware requirements or LS-EDGE for specific code or NEMA 4X installations.
• Final limits must be physical switches. Slowdowns may be virtual, saving installation time and effort. If required, ETS may also be virtual for ELGO landing systems; LS-EDGE systems use ETS magnets.
• Hall call fixtures are connected serially along a simple, four-wire drop, providing signal communication and fixture power.
• Universal I/O boards for field connections accept 24 to 120-volt inputs, AC or DC.

Adjusters

• Factory pre-adjusted per job requirements.
• Easy, hand-held device (mPAC) lets you learn and adjust floor heights and make car call entries. mPAC connects in the car, on the cartop or in the machine room.
• Traditional MCE LCD display/keypad parameter entry.

Maintenance

• Plug the hand-held mPAC into any controller or car CAN Bus port and diagnose the system.
• Multiple, redundant, self-contained processors ensure reliable control and constant safety monitoring. Each processor is continuously aware of all system activity.
• Components shared with MCE’s Motion 2000 hydraulic controller.
• Available MCE TAPS (Traction Auxiliary Power Supply) for automated rescue in the event of power failure.
• Built-in event log with 100 events.

1Lift-Net™ is a trademark of Integrated Display Systems, Inc.

Benefits

• Full domestic and export compliance
• Flexible component location for small machine room and machine room-less jobs
• Absolute position/distance feedback
• Up to 400 fpm* (2.0 m/s), 32 stops, simplex/duplex/groups to 8 cars
• Front and rear openings (up to 64)
• No leveling magnets, slowdown, or emergency terminal switches needed
• Simple installation, adjustment, and maintenance
• Minimal traveler and hoistway cable wire counts; minimal compensation requirement
• Universal I/O with electrical protection
• Easy setup and diagnostics

Features

• Serial hall call (optional)
• Serial COP (optional)
• Full distance feedback
• Universal I/O (24 to 120V AC or DC)
• DC, permanent magnet or AC induction machine compatible
• Serial P/I or voice annunciation interface
• iMonitor, iReport, iLobby, or IDS ready (monitoring, reporting, lobby display)

Compliance

• ASME A17.1/CSA B44-04
• BS EN 81
• AS 1735
• CSA B44.1/
• ASME A/7.5
• EN 12015 and 12016