Manuals

The instruction manuals and drawings listed below are in PDF format. All documentation is in English unless otherwise indicated. Instruction manuals and drawings not listed here are subject to availability.

Contact us to request documentation for a specific generator. In your request, provide both the serial and model numbers located at the top of the nameplate. Documentation for serial numbers prior to 70000 is subject to availability.

Documentation for complex units, including motor-generator sets with controls, is subject to availability and may incur a reproduction fee. Printed copies of instruction manuals and drawings are subject to printing and shipping fees. A quote is provided for work incurring fees prior to any work performed. We accept American Express, Visa, and MasterCard.

Please contact us with any questions or to request documentation.

Kato Engineering Inc.
P.O. Box 8447
Mankato, MN 56002-8447
USA
Tel: 507-625-4011
Fax: 507-345-2798
Email:KatoEngineering@mail.nidec.com 

Generators

350-01001-00 634 kB

Standard ac generator, single or two-bearing, drive-end air discharge

350-01001-00 FR 793 kB

Standard ac generator, single or two-bearing, drive-end air discharge (in French)

350-01001-00 SP 1,450 kB

Standard ac generator, single or two-bearing, drive-end air discharge (in Spanish)

350-01015-00 534 kB AC generator with center air discharge
350-01016-00 541 kB AC turbine generator
350-01032-00  4,151 kB Brushless AC rectified DC traction alternator
350-03001-00 1,648 kB MG set, brushless generator, induction motor
350-03006-00 812 kB MG Set (brushless, synchronous)
62047802  1,603 kB  Packaged generator (has "MTG" in nameplate code)
INS-51C-65 2,016 kB AC generator with direct-connected brush-type DC exciters
 

KAMAG generators and electrical connection drawings

350-04001-00 2,242 kB KAMAG single bearing with outboard exciter
350-04002-00 1,784 kB KAMAG two bearing with outboard exciter
P8800-479 137 kB Electrical connection drawings for KAMAG 14 @ 18 w/KAMAG I Regulator
P8800-618 181 kB Electrical connection drawings for KAMAG 14 @ 18 w/KAMAG I Regulator, newer
P8800-641 189 kB Electrical connection drawings for KAMAG 14 @ 18 w/KAMAG II Regulator
P8800-728 171 kB Electrical connection drawings for KAMAG 14 @ 18 w/KCR Regulator
P8800-826 151 kB Electrical connection drawings for KAMAG 14 @ 18 w/VR63 Regulator
P8800-837 132 kB Electrical connection drawings for KAMAG 22 w/APR63 Regulator
P8800-838 144 kB Electrical connection drawings for KAMAG 14 @ 18 w/APR63 Regulator
P8800-840 139 kB Electrical connection drawings for KAMAG 22 w/KCR-360 Regulator
P8800-841 108 kB Electrical connection drawings for KAMAG 14 @ 18 w/KCR Regulator, dual rated CB
 

Voltage regulators

351-01057-00 1,568 kB K65-128B & K125-10B  voltage regulators
351-01015-00A 1,617 kB KCR 160 voltage regulator
351-01001-00B 901 kB KCR 360 voltage regulator
INSR-23-71A 1,899 kB KCR 560 voltage regulator
351-01002-00A 1,510 kB KCR 760 voltage regulator
351-01021-00 2,056 kB KAMAG voltage regulator
INSR-9-78D 1,414 kB KAMAG II voltage regulator
351-01055-00 183 kB Dual automatic voltage regulator
351-01004-00 724 kB Voltage regulators (P/N 800-84132-07 and 80084132-11)
351-01052-00 1,133 kB Mag Amp voltage regulator, single phase (800-84132-XX)
351-01053-00   177 kB Mag Amp voltage regulator, three phase (800-84132-XX)
351-01006-00A 1,658 kB

Voltage regulator (800-84132-10 and 800-84132-13)

351-01060-00 1,400 kB DVR 100T Traction Digital Voltage Regulator
 

Miscellaneous controls

351-02003-00 417 kB Auto manual module (several part numbers)
351-02014-00 491 kB Diode fault detector
351-05003-00 36 kB Over-under voltage relay
351-05010-00B 410 kB Field failure and out-of-step protection assembly for synch motor (P/N 511-01111-25) 
351-05024-00 1,119 kB Field failure and out-of-step protection assembly for synch motor (P/N 511-01111-26)
351-05027-00 803 kB Voltage frequency sensor (511-01840-XX)
351-05028-00 978 kB Excitation sensor and reverse power relay (511-00820-01 and 511-00280-02)
351-07002-00 1,229 kB Line drop compensator (514-01905-04, 514-01906-04, 513-01907-04)
351-09002-00 750 kB Cross-current analyzer
352-56001-09 1,783 kB KRM2000 Kato Rotor Monitoring System
508-00470-60/61 151 kB Paralleling module
 352-56001-13  576 kB  KRM100 to KRM2000 Retrofit Instructions
This website uses cookies to ensure you get the best experience on our website. Learn More