CTScope
- Panoramica
- Specifiche
- Download
CTScope is a full-featured software oscilloscope for viewing and analyzing changing values within the drive.
The time base can be set to give high speed capture for tuning or for longer term trends. The user interface is based on a traditional oscilloscope making it familiar and friendly to all engineers across the globe.
Features
- Four channels
- Triggers
- Start/Stop at absolute time
- Start/Stop on value (rising/falling edge)
- Channels can capture parameter values from different nodes
- Scaling & offset per channel
- Cursors to aid measurement
- Zoom facility
- Scroll/Panning facility
- Save/load scope configurations with or without data
- Print facility
- Sample period possible down to 1ms with Turbo CTNet
- Works with CT-RTU, CTNet, Ethernet (CT-TCP/IP), MD29MON and ANSI interfaces
CTScope system requirements
- Pentium III 500MHz or better recommended
- Windows 2000/XP/Vista operating system. NOTE: Windows 95/98/98SE/ME/NT4 and Windows 2003 Server are NOT supported
- Internet Explorer V5 or later should also be installed
- Absolute minimum of 800x600 screen resolution. 1024x768 is recommended as a minimum
- 128MB RAM
Note that you must have administrator rights to install CTScope. You do not need administrator rights to run CTScope, but this will be necessary should you wish to simultaneously run CTSoft or SYPTLite.