Digitax HD M751 Base

Základní měnič s flexibilní konfigurací

Digitax HD M751 Base

Servoměniče a motory

1,5 A – 16 A se špičkovým proudem 48 A
200 V  |  400 V  |  0,25 kW - 7,5 kW

Flexibilita konfigurace díky volitelným modulům

Servoměnič Digitax HD M751 Base nabízí flexibilitu konfigurace díky dvěma volitelným pozicím pro rozšíření funkcí a přizpůsobení.

Spolu s vestavěnou komunikací RS485 je Digitax M751 vybaven také vestavěným pokročilým řízením pohybu AMC pro distribuované řízení pohybu v 1,5 osách.

Jeden servosystém pro VŠECHNY vaše automatizační potřeby

Flexibilita konfigurace díky volitelným modulům

Flexibilita
Maximálně flexibilní měnič pro výrobce strojů obsahuje dvě volitelné pozice pro rozšíření funkcí a přizpůsobení. Vestavěná komunikace Modbus RTU přes RS485. Vestavěný pohybový řadič AMC pro 1,5osé řízení pohybu. Analogové a pulzní (směr) centralizované řízení pohybu. Zvýšená produktivita a bezpečnost stroje.    

Vestavěný pokročilý pohybový řadič AMC
Mezi vlastnosti pokročilého 1,5osého řadiče pohybu patří  
  • Doba cyklu 250 µs
  • Generátor profilu pohybu
  • Elektronická převodovka
  • Interpolovaná vačka
  • Funkce nájezdu na referenci
  • Vysokorychlostní zachycení polohy
    • Features
      Maximum performance
      • 300% peak current performance pulse-duty overload
      • Optimised control loops for high dynamic performance
        • 62.5 μs current loop
        • 250 μs position and speed loop
      • Up to 16 kHz switching frequency
      • Supports a wide range of feedback technologies including Quadrature, SinCos (including absolute), SSI, BiSS, EnDat (up to 4 Mb with EnDat 2.2) and resolvers
      • Maximum performance package with high torque density, low inertia Unimotor hd servo motors
      • Analogue and pulse/direction control for centralised motion
      • Advanced 1.5 axes Motion Controller, key features include:
        • Real-time tasks
        • 250 μs cycle time
        • Motion profile generator
        • Electronic gearbox
        • Interpolated CAM
        • 2Homing functions
        • High speed position freeze

      Minimum size
      • 40 mm drive width and option bracket adds 22 mm, providing a highly competitive maximum drive width of 62 mm
      • Reduce cabinet height by directly stacking rows of drives. Patented Ultraflow™ technology expels heat directly outside of the cabinet through the rear of the drive (drive heat dissipation can also be achieved via vents on the top of the drive, as standard).
      • Fits into cabinets just 200 mm deep

      Easy installation and setup
      • DIN rail alignment
      • Kits for easy multi-axis installation
      • Single motor cable and electronic motor name plate for fast set up
      • Seamless motor-drive pairing with Unimotor hd servo motors
      • Easy access pluggable connectors
      • Rapid commissioning with the Connect PC tool and SD cards
      • Machine Control Studio provides a flexible and intuitive environment for programming automation and motion control features
        • Programmable with IEC61131 standard languages

      Flexibility
      • Two option slots for functionality extension and customisation (see available option modules)
      • Built-in RS485 communications

      Safety on-board
      • Improved productivity with machine safety
        - Integrated dual Safe Torque Off
        - Meets SIL3 (Safety Integrity Level 3) and PLe (Performance Level e)
    • Functional Safety
      Functional Safetyfunctional-safety

      All Digitax HD drives have integrated dual Safe Torque Off (STO) inputs, certified to SIL3 / PLe, providing an elegant and reliable safety solution. 
      The addition of an MiS250 safety option extends the built-in STO with the ability to safely monitor and/or restrict the scope of motion. 
      Safety functions include: STO, SBC, SOS, SS1, SS2, SLS, SSM, SLA, SDI, SLP & SES
      For maximum flexibility in the safety system architecture, the modules support both wired and network safety connections: CIP-Safety on EtherNet/IP and Safety over EtherCAT (FSoE).
      To find out more, visit our Functional Safety page.

    • Options
      Keypads
      Remote-Keypad-RTC

      Remote Keypad RTC
      The keypad is remote mountable, allowing flexible mounting on the outside of a panel (meets IP54/NEMA 12). Three line plain text, multi-language LCD keypad for rapid set-up and helpful diagnostics. Battery operated real-time clock allows accurate time stamping of events, aiding diagnostics.

      ORDER CODE: 82400000019600

      KI Compact Display Option module for servo drive
      KI Compact Display
      The display (fitted on M753, optional on M751) ensures access to drive diagnostics even in the absence of network connectivity. Includes 2 rotary switches for hardware setting of the node address for faster commissioning of the motion network. 
       

      ORDER CODE: 82700000020400

      KI-Compact-485-Adaptor
      KI-Compact 485 Adaptor
      This allows the drive to communicate via RS485. This is commonly used for programming if a keypad or KI Compact Display is not ordered with the drive.
       

      ORDER CODE: 82700000020300

      System Integration Modules - Feedback

      SI-Encoder
      Quadrature encoder input interface module.
       

      ORDER CODE: 82400000018100

      SI-Universal Encoder
      Encoder input and output interface supporting Quadrature, SinCos, EnDat and SSI encoders.
       

      ORDER CODE: 82400000018300

      System Integration Modules - Communications

      SI-Profibus Communication System Integration Modules

      SI-PROFIBUS
      SI-PROFIBUS interface module enables follower connectivity. It is possible to use multiple SI-PROFIBUS modules or a combination of SI-PROFIBUS and other option module types to add additional functionality such as extended I/O, gateway functionality or additional PLC features.

      ORDER CODE: 82400000017500

      SI-POWERLINK

      SI-POWERLINK
      SI-POWERLINK serves applications ranging from simple open-loop systems through to those demanding precise motion control.

      ORDER CODE: 82400000021600

      SI-Devicenet Communications System Integration Module

      SI-DeviceNet
      SI-DeviceNet enables follower connectivity. It is possible to use multiple SI-DeviceNet modules to provide additional functionality.

      ORDER CODE: 82400000017700

      SI-CANopen Communication System Integration Module

      SI-CANopen
      SI-CANopen interface module supports various profiles, offering optimum flexibility.

      ORDER CODE: 82400000017600

      SI-Ethernet Communication System Integration Module

      SI-Ethernet
      SI-Ethernet can be used to provide high speed drive access, global connectivity and integration with IT network technologies. 

      ORDER CODE: 82400000017900

      SI-EtherCAT Communications System Integration Module

      SI-EtherCAT
      SI-EtherCAT allows Commander C general purpose drive to connect and interface with EtherCAT networks.

      ORDER CODE: 82400000018000

      SI-Profinet Communications System Integration Module  SI-PROFINET
      SI-PROFINET allows Commander C to communicate and interface with PROFINET PLCs and networks.

      ORDER CODE: 82500000018200

      SI-Interbus-communications-option-module
      SI-Interbus 500kBd

      ORDER CODE: 82400000021220

      SI-Interbus 2MBb             

      ORDER CODE: 82400000021230

      SI-INTERBUS for easy integration to the Interbus fieldbus in applications that use or drives

      System Integration Modules - Additional I/O

      SI-IO System Integration Module

      SI-I/O
      Extended I/O interface module to increase the number of I/O points on a drive. Provides additional: 4 x Digital I/O, 3 x Analog inputs (default)/Digital inputs, 1 x Analog output (default)/Digital input, 2 x Relays.

      ORDER CODE: 82400000017800

      System Integration Modules - Applications
      SI-Apps Compact
      Compatible module allows SyPTPro application programs to be re-complied for HD.

      ORDER CODE: 82400000020700

      MCi200 system integration module
      MCi200
      Second processor, providing advanced customization using industry standard IEC61131-3 programming languages.

      ORDER CODE: 82400000017000

      MCi210 System Integration Module with a dual port Ethernet
      MCi210
      Extended advanced machine control, provides MCi200 functionality with additional ports and simultaneous connectivity to 2 separate Ethernet networks.

      ORDER CODE: 82400000016700

      PTi210 PowerTools Integration Module
      PTi210
      PTi210 allows setup of complex servo motion control applications within minutes

      ORDER CODE: 82400000021400

      Optional Accessories
      RS485 USB Communication Cable
      USB to EIA485 Communications Converter Cable
      The USB comms cable allows the drive to connect to a PC for use with Commander's PC tools.

      ORDER CODE: 4500-0096

                      digitax m75c capshare servo
      Digitax M75C CapShare

      Capacitor module (200 V and 400 V) with thermal protection to increase maximum energy storage capacity, and optimise energy efficient usage.

    • Software
      We make it quick and easy
      Connect - Intuitive Commissioning Software

      Based on Control Techniques’ 25 years' experience, Connect is our latest drive configuration tool for commissioning, optimizing and monitoring drive/system performance.

       

      Download

      Machine Control Studio - Programming Tool
       machine-control-studio-icon

      Control Techniques' Machine Control Studio provides a flexible and intuitive environment for programming new automation and motion control features.

       

      Download

    • Downloads

    Further Information

    This website uses cookies to ensure you get the best experience on our website. Learn More