Brushless DC Right Angle Gearmotors
Merkle-Korff offers our Brushless DC gearmotors with either hall only feedback or a fully integrated control board, internal to the motor. The integral control is a fully digital control with the latest in micro-processor technology on board. The 52mm Planetary gearbox has high continuous and peak torque capability. It is also a very compact and low weight design.
-
Features
Internal controller
- Two quadrant programmable control: current limiting, acceleration, speed regulation, velocity profiles
- Built-in quadrature encoder
- Over-current protection
- Locked Rotor Protection
- 0 – 5 or 0 – 10 VDC speed reference voltage
- Dynamic braking and holding capability
- Input voltage polarity protection
- Electronic commutation
Motor
- Long life
- Ball bearing construction
- 8 pole rotor
- 3 phase stage – wye connection
- High energy/skewed magnets for reduced cogging
- Integral hall sensors for rotor position
- Class F Insulation
Gearbox
- Two Gearbox Sizes: RA25 and RA31
- Gearbox Housing: Zinc Die-Cast High Efficiency Gearing
- Worm Gears: Plastic or Bronze
- Gearboxes are permanently lubricated with synthetic gear grease
Optional Features
- Hall only output: externally controlled
- Incremental Encoders: Optical, and Capacitive with various resolutions
- Electromechanical Brakes: Power-On, Power-Off
-
Applications
- Door Automation
- Commercial food equipment
- Pumps - Peristaltic and Diaphragm
- Recreational Vehicle Automation
- Pellet stove
- Health Care - Mobility
- Satellite positioning systems
- AGV / Robotics
-
Specifications
- Input voltage: 12 to 32 Vdc
- Insulation class: F (155° C)
- Bi-directional
- Integral Drive Electronics available on most models
- Speed Control: PWM or Analog input. Closed Loop Programmable on some models
- Velocity profile: programmable on some models
- Acceleration: programmable on some models
- Temperature protection: 90° C/110° C std
- Current limit: programmable
- Locked Rotor Protection
- Tachometer O/P: 2 Ch – 6PPR
- Gearing peak torque: 15 N.m
- Speed range: 1 to 400 RPM
