- Overview
- Downloads
Industrial control applications typically use a PLC system to manage the process; using I/O to provide an interface to switches, relays and sensors attached to the machine.
Control Techniques continues to lead the way with our scalable drive-based controller platform that ranges from the ultra-convenient onboard PLC to the powerful MCi machine/motion controller. To supplement this controller platform and dramatically extend the range of applications that can benefit from this cost- and performance-optimized solution, we now offer an extensive range of remote I/O.
Benefits of Control Techniques RTMoE remote I/O:
- Allows the number of I/O points to be dramatically expanded over those available on the drive
- Brings greater diversity to the type of I/O available
- Remote I/O is directly supported by any Ethernet based Unidrive, through the optional SI-Ethernet module or the Ethernet port on board of the MCi210 module
- The MCi210 module provides the most versatile and powerful solution
For applications where an industrial PC is required, Control Techniques can provide EtherCAT Remote I/O.
RTMoE / Modbus TCP Remote I/O
In this configuration, add-on RTMoE / Modbus TCP Remote I/O modules connect directly via the on-board Ethernet port of the Unidrive M7XX series drives, through the optional SI-Ethernet module or via the on-board Ethernet port of the MCi210 Machine Control option modules.
A typical configuration (as shown below) would include MCi2XX Machine Control option modules, Machine Control Studio software and the MCh040/MCh070 HMI Panels. All sensor inputs can be monitored, and outputs controlled, including LEDs, pushbuttons, temperature controls, machine status indicators and fluid flow sensors.
EtherCAT Remote I/O
In this configuration, add-on EtherCAT Remote I/O modules connect via the on-board EtherCAT port of the MCe or MCz controllers, or through any EtherCAT port on any PLC or controller.
A typical scalable configuration (as shown below) would feature the EtherCAT Remote I/O module, used together with MCe or MCz controllers, MCi2XX Machine Control option modules, Machine Control Studio software and the MCh040/MCh070 HMI Panels. All sensor inputs can be monitored, and outputs controlled, including LEDs, pushbuttons, temperature controls, machine status indicators and fluid flow sensors.
