Remote I/O
Process control applications
 
  • Overview
  • Downloads

Industrial control applications typically use a PLC system to manage the process; using I/O to provide an interface to switches, relays and sensors attached to the machine.

Control Techniques continues to lead the way with our scalable drive-hosted controller platform that ranges from the ultra-convenient onboard PLC to the powerful MCi machine/motion controller.
To supplement this controller platform and dramatically extend the range of applications that can benefit from this cost- and performance-optimised solution, we now have an extensive range of remote I/O.
 

Benefits of Control Techniques RTMoE remote I/O: 

  • Allows the number of I/O points to be dramatically expanded over those available on the drive
  • Brings greater diversity to the type of I/O points available
  • Remote I/O is directly supported by any Ethernet based Unidrive, through the optional SI-Ethernet module or the Ethernet port on board of the MCi210
  • Combining with an MCi210 module gives a versatile and powerful controller platform

For applications where an industrial PLC is required, Control Techniques is able to provide an EtherCAT Remote I/O.

 

RTMoE or Modbus TCP Remote I/Os

In this configuration, add-on RTMoE / Modbus TCP Remote I/O modules connect directly via the on-board Ethernet port of the Unidrive M7XX series drives, through the optional SI-Ethernet module or via the on-board Ethernet port of the MCi210 Machine Control option modules.

A typical configuration (as shown below) would include MCi2XX Machine Control option modules, Machine Control Studio software and the MCh040/MCh070 HMI Panels. All sensor inputs can be monitored, and outputs controlled, including LEDs, pushbuttons, temperature controls, machine status indicators and fluid flow sensors.

EtherCAT Remote I/Os

In this configuration, add-on EtherCAT Remote I/O modules connect via the on-board EtherCAT port of the MCe or MCz controllers, or through any EtherCAT port on any PLC or controller.

A typical scalable configuration (as shown below) would feature the EtherCAT Remote I/O module, used together with MCe or MCz controllers, MCi2XX Machine Control option modules, Machine Control Studio software and the MCh040/MCh070 HMI Panels. All sensor inputs can be monitored, and outputs controlled, including LEDs, pushbuttons, temperature controls, machine status indicators and fluid flow sensors.

Brochures


Case Studies


Datasheets


Flyers


Product Catalogue


Technical Documents, Software and Drawings


Videos


White Papers